3.4-3 CHANNEL SCAN MODE
1) NORMAL SCAN MODE
This feature allows you to scan for an active channel and communicate
with the party transmitting.
The power saver is disabled in this mode.
To access the Auto Channel Scan menu,
Press the Function Button (#12) until the word “SC” appears in the LCD.
- Press the Down Button (#11) or the Up Button (#10) to choose “nr”.
- Press the Monitor Button (#2) to confirm your selection.
The unit will begin scanning for an active main channel.
If a transmission is detected, the Rx and RSSI icons will appear
in the LCD Panel (#8).
To turn off the auto channel scan feature return to the Scan mode
by pressing the Function Button (#12) and choose ”OFF”.
You can pause on any channel while in the Auto Channel Scan Mode
by pressing the the PTT Button (#4) during the reception of a
signal for 5 seconds afterward.
Pressing the Monitor Button (#2) will resume scanning and elimi-
nate that channel from those being scanned.
2) PRIORITY SCAN MODE
This feature allows you to monitor two different channels at the
same time.
If you pre-set any priority channel other than the current chan-
nel in use, the pre-set channel will be scanned every 0.5 second
and signals you when a call is received.
While in the Priority Channel Scan Mode you may hear transmission
from either a primary or secondary channel when transmitting.
The unit will always transmit on the primary channel unless the
PTT Button (#4) is pressed during or immediately following the
reception of secondary channel transmission.
The power saver mode is disabled in the Priority channel scan
mode and the volume is not adjustable.
To access the Priority channel scan mode.
- Press the Function Button (#12) until the word “SC” appears in the
LCD Panel (#8).
- Press the Up Button (#10) or the Down Button (#11) to choose “Pr”
and then press the Shift Button (#13).
- Choose the priority channel by pressing Up Button (#10) and
Down Button (#11) to select the desired channel number you wish
to closely monitor.
- Press the Monitor Button (#2) to confirm your selection.
-To turn off the Priority channel scan feature, press the Function
Button (#12) until the word “SC” appears on the LCD Panel (#8)
and then choose “OFF” in the scan mode.
(55 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales